Skip to content
We ship across Canada and USA. Email us at sales@warehoos.com
We ship across Canada and USA. Email us at sales@warehoos.com

Protecto Wall Vp Water Resistive Barrier 40 x 120

Original price $669.95 - Original price $669.95
Original price
$669.95
$669.95 - $669.95
Current price $669.95
Protecto Wall VP - Self-Adhering, Self-Sealing Vapor Permeable Water Resistive Barrier

Protecto Wall VP Water Resistive Barrier is a primer-free self-adhering, self-sealing, nonwoven, vapor permeable, microporous polyolefin laminate that provides 98.5% drainage efficiency.

This product is utilized as a self-adhered, vapor permeable, water resistive barrier on exterior sheathing as well as behind exterior cladding and siding.

Note: Protecto Wall VP can be applied in extreme cold/hot weather; however, Protecto Wrap Company does not recommend applications below 0ºF (-17ºC) or above 125°F (51.6°C) due to health and safety reasons.

FEATURES & BENEFITS
  • No primer needed – utilizes Super Stick Technology Adhesive
  • Fully adhered without mechanical fasteners or seam tape
  • Install year round, in temperatures as cold as -20°F (-28°C) or as hot as 125°F (52°C)
  • 180 day UV exposure
  • Compatible with and will adhere to most construction surfaces
  • Drainage Efficiency 98.5%
  • NFPA 285 Compliant Assemblies
SHELF LIFE

Protecto Wall VP maintains optimum initial adhesion to substrates when used within two years from the date of manufacture.

STORAGE

Protecto Wall VP should be stored in the original, unopened container. Storage area should remain dry and out of direct sunlight. Do not remove materials from original containers until ready for use.

PREPARATION

All surfaces shall be clean, dry (it is permissible to install Protecto Wall VP over a damp surface, not a wet surface) and free of any foreign materials. The surface shall be free of gaps, sharp edges and protrusions. Any area with missing or damaged sheathing shall be repaired prior to installation of the Protecto Wall VP.

Protecto Wrap Company recommends testing substrates for adhesion prior to full application. 

Installation over damp surfaces may result in the formation of bubbles/air pockets under the Protecto Wall VP due to moisture drive, the use of a roller will help to remove the bubbles and air pockets.